英語縮略詞“MTBR”常常作為“Mean Time Between Repair”的縮寫來使用,中文表明:“均勻修正間隔時刻”。本文將具體介紹英語縮寫詞MTBR所代表英文單詞,其對應的中文拼音、具體解說以及在英語中的盛行度。此外,還有關于縮略詞MTBR的分類、使用范疇及相關使用示例等。
“MTBR”(“均勻修正間隔時刻)釋義
-
英文縮寫詞:MTBR
-
英文單詞:Mean Time Between Repair
-
縮寫詞中文扼要解說:均勻修正間隔時刻
-
中文拼音:píng jūn xiū fù jiàn gé shí jiān
-
縮寫詞盛行度:12500
-
縮寫詞分類:Governmental
-
縮寫詞范疇:Military
以上為Mean Time Between Repair英文縮略詞MTBR的中文解說,以及該英文縮寫在英語的盛行度、分類和使用范疇方面的信息。
英文縮略詞MTBR的擴展資料
-
The reliability evaluation indices of bus arrangement systems are availability,unavailability,failure frequency,mean time between failure,mean time to repair,failure rate and repair rate.
文中核算的電氣主接線體系的牢靠性目標是:可費用,不行費用,毛病頻率,均勻相鄰毛病間隔時刻,均勻修補時刻,毛病率,修正率。
-
Finally obtain the mean time between failures ( MTBF ),mean time of repair failures ( MTTF ),inherent availability ( A ) as well as reliability index such as reliability and failure rate function according to the distribution model.
最后根據散布模型核算得到該加工中心的毛病間隔時刻(MTBF)、均勻修理時刻(MTTF)、固有可費用A以及牢靠度和失功率函數等牢靠性目標。
-
To satisfy these requirements,either MTBF ( Mean Time between Failures ) is lengthened or MTTR ( Mean Time to Repair ) is shortened.
要滿足這一要求,一方面延伸均勻無毛病時刻MTBF,另一方面縮短排除毛病修補時刻MTTR。
-
The mean time between failure ( MTBF ) is449hours,and the mean time to repair ( MTTR ) is22.1hours. ln its subsystems,the MTBF of tool post is smallest and that of electric system is biggest;
均勻無毛病時刻MTBF為449h.均勻修正時刻MTTR為22.1h.各子體系中,方刀架的牢靠性最好,電器體系的牢靠性最差;
上述內容是“Mean Time Between Repair”作為“MTBR”的縮寫,解說為“均勻修正間隔時刻”時的信息,以及英語縮略詞MTBR所代表的英文單詞,其對應的中文拼音、具體解說以及在英語中的盛行度和相關分類、使用范疇及使用示例等。